EXOS
The Exos from Abiss is a system for measuring micro-leaks and improving food package seal integrity.
Available in 3 Models
Leak
Leak + O2
Leak + O2 + CO2
EXOS LEAK
The EXOS LEAK allows you to measure airtightness for vacuum packaging and pneumatic circuits. This measurement device also checks the seal resistance with a burst test function. These two tests can be carried out in quick succession on the same package. The sensitivity threshold is 5 microns in terms of perforation size (Equivalent size of a bacterium is between 1 and 10 microns)
BENEFITS – ALL MODELS
- Meets standards:
DIN 55508-1: measures flow rate at constant pressure
ASTM F1140: seal strength
ASTM F2054: burst test - Measures with low pressure
- Breathability measurement (micro-perforated films)
- Tested on vacuum packaging
- Fully traceable via an internal spreadsheet
- Excessive pressure can be fitted manually or automatically
- Remote maintenance 7 days a week, with remote connection available
EXOS LEAK + O2
The EXOS LEAK/O2 allows you to measure the percent of O2 and the airtightness for all types of packaging, containers and pneumatic circuits. This measurement device also checks the resistance of the seal by performing a burst test. These three tests can be carried out in quick succession on the same packaging. The EXOS lets you inspect the integrity of your packaging, and can be used in the laboratory as well as during the manufacturing process.
- Combines 5 measurements in 1 single test:
- O2 gas analysis
- Micro-leaks down to 5 μm
- Creep test (A&B)
- Burst Test
EXOS LEAK + O2 + CO2
The EXOS LEAK/O2/CO2 allows you to measure the rate of O2/CO2 and the airtightness for all types of packaging, containers and pneumatic circuits. This measurement device also checks the resistance of sealing using a bursting test. These three tests can be carried out in quick succession on the same packaging. The EXOS lets you inspect the integrity of your packaging, and can be used in the laboratory as well as during the manufacturing process.
- Combines 5 measurements in 1 single test:
- O2 gas analysis
- CO2 gas analysis
- Micro-leaks down to 5 μm
- Creep test (A&B)
- Burst Test
| Ingress protection of enclosure | IP 54 |
| Measurement device | Bench-mounted |
| Enclosure | Aluminium and inox |
| Weight | 11 lbs. |
| Width | 13.38 in |
| Height | 6.69 in |
| Depth | 9.05 in |
| Power | 100-240VAC -50/60Hz – 63W |
| Feed pressure | 60 to 115 PSI (dry and oil free) filtered at 20μm |
| Inlet pneumatic connection diameter | 4 x 6 mm tube connection |
| Memory capacity | 4 to 32 gigabytes |
| Display | Color touchscreen 7’’ |
| Digital interfaces | 1 USB 2.0 and 1 Ethernet RJ45 |
| Storage conditions | 0 – 158°F/0 – 90% HR |
| Terms of use | 0 – 104°F/10 – 90% HR |
| O2 Oxygen measurement | Technology : Electrochemical Precision : +/- 1% relative T90 response time : < 1 s Resolution : 0.01% Average service life : 18 months in air |
| CO2 Carbon Dioxide measurement | Technology : NDIR Accuracy : +/- 2% full scale Resolution : 0,1% T90 response time : 7s Average service life : 10 years |
| Pressure measurement | yes |
| Leak measurement | Technology : Mass flowmeter Precision : +/- 0.8% full scale (μm) ; +/- 1% of the reading + 0.1 ml/min Resolution : 0.1ml/min – 1μm Measurement : 0.1-500 ml/min – 15 μm to 500 μm (from 5 μm with the lab option) Test pressure : From 10 to 500 mbar +/- 1mbar Flow : Filling: 4200 ml/min Compressed air supply : 4 to 8 Bar (dry and oil free filtred to 20 µm) Analytical curves (displayed and recordable) |
| Burst test | Technology : Barometric Accuracy : +/- 0,5% full scale Resolution : 1mbar Flow scales : 0,2 – 1,4 bar Quick inflating flow : Minimum 250l/h Burst pressure : Up to 1,4 bar Analytical curves (displayed and recordable) or Creep test Technology : Barometric Accuracy : +/- 0,5% full scale Resolution : 1mbar Measurement : 200 – 500 mbar Pressure : 500 mbar Flow : Filling: 4200 ml/min Analytical curves (displayed and recordable) |
| Blocked circuit detection | yes |
| Pump suction control | yes |
| Compensation for atmospheric pressure variations | yes |
| Results storage | yes |
| USB Connection | yes |
| Touchscreen | yes |
| Traceability | Format, line, operator, batch number, comment at the end of the test |
| Remote Connection | Remote control possible for remote maintenance |
| Network connection (Ethernet socket) | yes |
| Automatic measurement trigger | yes |
| Options | 3G router + HMI Advanced Waterproof RJ45 Ethernet port |
- 2.5 L buffer tank with check valve
- Calibrated leak
- USB – 1D barcode reader
- Filter for the expansion valve and oil
- separator of the compressed air supply
- Detectable stylus for the touchscreen
- Can Piercer to pierce metal or rigid membrane packaging
- Secured needle holder
- Needle arm support
- Needle cleaning tool
- 1 Carry case IP67 : 22 x 17 x 8.5 in
- 1 Sampling kit
- 2 Needles
- 2 Filters
- 1 Stabilization tank
- 1 000 Septums leak
- 1 Flexible probe holder
- 1 Metal detected stylus
- 1 Pressure regulator compressed air
- 1 Power supply
- 1 Calibration certificate
- 1 User manual
- 1 USB key
- 1 3G key